European Standard Tube for Pressure Purposes Standard EN10216-1 EN10216-2 Application It is applied for manufacturing pipeline, vessel, equipment, pipe fittings and steel structure. Main Steel Tube Grades P195TR1, P195TR2, P235TR1, P235TR2, P265TR1, P265TR2, P195GH, P235GH, P265GH, 13CrMo4-5, 10CrMo9-10 Chemical Composition

St	Steel Grade	Chemical Composition%
		C	Si	Mn	P	S	Cr	Mo	Ni	Al	Cu	Nb	Ti	V
EN10216-1	P195TR1	0.13	0.35	0.70	0.025	0.02	0.30	0.08	0.30	/	0.30	0.01	0.04	0.02
	P195TR2	0.13	0.35	0.70	0.025	0.02	0.30	0.08	0.30	0.02	0.30	0.01	0.04	0.02
	P235TR1	0.16	0.35	1.20	0.025	0.02	0.30	0.08	0.30	/	0.30	0.01	0.04	0.02
	P235TR2	0.16	0.35	1.20	0.025	0.02	0.30	0.08	0.30	0.02	0.30	0.01	0.04	0.02
	P265TR1	0.20	0.40	1.40	0.025	0.02	0.30	0.08	0.30	/	0.30	0.01	0.04	0.02
	P265TR2	0.20	0.40	1.40	0.025	0.02	0.30	0.08	0.30	0.02	0.30	0.01	0.04	0.02
EN10216-2	P195GH	0.13	0.35	0.70	0.025	0.020	0.30	0.08	0.30	0.02	0.30	0.01	0.04	0.02
	P235GH	0.16	0.35	1.20	0.025	0.020	0.30	0.08	0.30	0.02	0.30	0.01	0.04	0.02
	P265GH	0.20	0.40	1.40	0.025	0.020	0.30	0.08	0.30	0.02	0.30	0.01	0.04	0.02
	13CrMo4-5	0.10-0.17	0.35	0.40-0.70	0.025	0.020	0.70-1.15	0.40-0.60	0.30	0.04	0.30	/	/	/
	10CrMo9-10	0.08-0.14	0.50	0.30-0.70	0.025	0.020	2.00-2.50	0.90-1.10	0.30	0.04	0.30	/	/	/

  Mechanical Properties  

Standard	Steel Grade	Mechanical Properties
		Tensile Strength MPa	Yield Strength MPa	Elongation %	Impact Energy J
EN10216-1	P195TR1	320-440	≥195	≥27	/
	P195TR2	320-440	≥195	≥27	≥40
	P235TR1	360-500	≥235	≥25	/
	P235TR2	360-500	≥235	≥25	≥40
	P265TR1	410-570	≥265	≥21	/
	P265TR2	410-570	≥265	≥21	≥40
EN10216-2	P195GH	320-440	≥195	≥27	≥40
	P235GH	360-500	≥235	≥25	≥40
	P265GH	410-570	≥265	≥23	≥40
	13CrMo4-5	440-590	≥290	≥22	≥40
	10CrMo9-10	480-630	≥280	≥22	≥40